logotipo domenech machinery & sustems

Trituration

Ripping shredder

Machine intended for shredding plastic materials. The Domenech EHV series ripping shredders have been designed and tested for various plastic materials such as PVC and PET and for other materials such as paper and cardboard. With materials such as film, final granulometries of less than 50 mm are achieved.

+ info
Sectors of application

MODEDA

Machine intended for shredding plastic materials. This shredder has been designed and tested for various plastic materials such as PVC and PET and for other materials such as paper and cardboard. With materials such as film, final granulometries of less than 50 mm are achieved.

+ info
Sectors of application

Granulator shredder

Machine intended for shredding different plastic materials such as PVC, PET, FILM and other materials such as paper and cardboard. With materials such as PET, final particle sizes of less than 14 mm are achieved. The shredding process is carried out by blades mounted on a robust shaft that rotates at a medium speed. The tips of these blades dig into the material and produce the cut by moving at a different speed than fixed blades.

+ info
Sectors of application

CDR primary shredder

Machine aimed at the primary crushing of different types of tough materials and, in general, materials from MSW and RSI selection lines that are compatible in terms of size and shape. The material enters the inlet in large quantities and by means of the impeller blades the material is torn against the fixed blades. The crushed material falls through the grate onto the conveyor that has been placed at the exit.

+ info

CDR secondary shredder

Machine aimed at the secondary crushing of different types of tenacious materials such as Cardboard, Wood, Plastics, Biomass from the primary shredder. The material enters the inlet in large quantities and by means of the pusher the material is dosed towards the impeller where it is crushed. The ground material falls through the grate onto the conveyor that has been placed at the exit.

+ info

Pneumatic shredder

Machine intended for crushing plastic materials. Domenech granulator shredders have been designed and tested for various plastics and other materials, such as paper and cardboard. With materials such as PET, final particle sizes of less than 14 mm are achieved. The material enters through auger feeders that fill the crushing area and is crushed through the fixed and mobile blades.

+ info
Sectors of application

Spikes shredder

Machine aimed at micronizing different types of non-ferrous minerals. This type of process is essential in dry preparation lines in the product finishing stage, the maximum humidity depends on the consistency curve of each material to be ground, always being moderately low.

+ info
Sectors of application

Knife shredder

Machine intended for crushing aluminum shavings. Domenech aluminum shredders have been designed and tested for materials with different grain sizes, densities, relative humidity, degrees of abrasiveness and shapes.

+ info
Sectors of application

Other categories